User Manual
33
and set up cruise channel, cur point and total quantity and stop time etc.
How to set pre-set point
Total:
set up pre-set point quantity
Cur Point:
indicates starting point cruised. System default point is 01. The model support up to 255
pre-
set points.
Stop time:
sets the stop time at each point
GOTO:
allow you go to a specific preset point.
Set:
allow you set a set of specific preset points of a PTZ camera.
1.
Select a camera you desire to set a preset point;
2.
Adjust the camera in a desired direction;
3.
Click [Set] to set the point as preset point;
4.
Click [Save] to save the preset point;
5.
Follow the above step to add one more preset point.
Save:
save all the preset points
Clear
: allow you delete one selected preset point.
Note
: Up to 255 pre-sets per one camera can be stored. However, actual preset quantity differs
depending on PTZ performance.
5.7 PIP Mode
You can display a Picture-in-Picture in live mode. PIP has two display modes, including 1X1 display
mode and 1X2 display mode.
5.8 Record search
You could enter into [Record Search] menu from Pop-up menu conveniently and quickly and
search/playback the record histories. We introduced Record search details previously in Section 5.3.3.1.
5.9 Mute
Click the [
] icon, or press <Mute> button on the front panel and Remote controller to control the
mute of DVR.
5.10 Manual Record
You can start manual record function, or you also can click [
] button on the Front panel or Remote
controller to activate manual record. Please stop record manually once you activate manual record.
5.11 Stop record
To stop record quickly, please click the icon [
] or [Stop] button on the front panel or remote controller.
1x1 display mode
1x2 display mode
Summary of Contents for SVR9004CHD
Page 1: ......
Page 63: ...User Manual 58 8 5 System Connection Diagram 4CH 8CH ...
