19
Always keep your HUSKY tractor in a dry, protected place
when not in use to prolong its usefulness and appearance.
With year around use, it is not necessary to "store" the
tractor but when it is not to be used for some time, it
should be prepared for storage in the following manner:
1. Completely clean all accumulated dirt or trash from all
parts, especially engine fins and flywheel screen.
2. Wipe oil or a rust preventative on any parts that may rust.
3. Drain gas tank and carburetor.
4. Remove, clean and regap spark plug and put a small
amount of oil (SAE 30) in cylinder head. Consult Engine
Manufacturer's Manual.
5. Without starting the tractor, turn the engine over a few
times to fully lubricate the cylinder walls, valve seats and
valve stems. This can be done by engaging the key starter
briefly. Replace spark plug.
6. Keep tractor covered.
7. BATTERY – Each week fill each cell to triangle with
distilled water. Keep terminal posts cleaned of corrosion
salts and coat with petroleum jelly or grease. Keep cables
clean. Stored battery must be kept fully charged and with
all cells filled to triangle. Store at cool temperature 20° to
50°. Check each two months and charge as necessary.
8. The air cleaner should be cleaned and sealed off with a
plastic bag or facsimile, for the duration of the storage
period.
9. If tractor is stored with an attachment mounted on it,
the attachment MUST be lowered to the ground and
P.T.O. lever must be in OFF position.
STORING YOUR HUSKY TRACTOR
Bolens reserves the right to change specifications, add improvements, or discontinue the manufacture of
any of its equipment without notice or obligation to purchasers of its equipment when equipment was
purchased prior to decision to make changes, add improvements, or discontinue manufacture.
Bolens approval of use attachments manufactured by other manufacturers is limited to assurance that
such use will not void Bolens warranty on the Bolens equipment to which the outside manufactured
attachments are adapted. The responsibility for the design, performance, durability, safety and operation,
service repair availability, and warranty obligation remain with the outside manufacturer. Bolens
specifically excludes from its warranty obligation all such outside manufactured attachments.
Bolens warranty will be voided if unapproved attachments are adapted to use with Bolens equipment and
are so used.
