96
SINFONIA500SE / EMPRIO 600SE OWNERS MANUAL
➢
If you want to assign individually key zones to all parts on the lower manual, cancel the global
split first by setting the split point to the highest lower manual key using the
[Split]
button.
➢
For corresponding global presets, the global lower manual split point should be stored on the
highest key in the preset (see page
xxx Menu Preset Options
).
Part Options
The
[F]
button
Options
takes you to many other interesting part functions:
First key/last key:
In the previous section, you learned how to enter a key zone for a
part directly from the keyboard. Alternatively, you can set the key
zone by entering the MIDI key number 0...127 for the first and last
key.
Mode:
The usual play mode for a key zone is
truncate
: The part plays only on
the defined key area of the zone (from key - to key).
Alternatively, you can set the
Repeat
mode: In this case, the key area
defined as the key zone is repeated over the entire manual.
Interesting e.g. for choir voices: Define a larger key range as key zone,
in which the choir sounds realistic and not too high or too low (no
singer has the tone range of the SEMPRA!). If you now set the Repeat
mode, you can play the choir on the entire keyboard, and it always
sounds balanced and natural in pitch.