37
SINFONIA500SE / EMPRIO 600SE OWNERS MANUAL
If no split point is set, all parts play parallel on the entire manual.
To make settings, e.g. the sound selection for the individual parts, simply tap on the desired part in the
display or select it using the buttons to the right or left of the display.
All parameter fields in the middle column of the editor or on the
[F buttons]
below the display refer to
the currently selected part.
We will first look at the most important settings, a detailed description of the Part-Editor will follow in
a separate chapter of this manual.
•
To change the sound of the selected part, tap the part again. You are now taken to the sound
selection screen. In the upper status line, the display shows for which part the sound
selection has been activated.
•
On the left you can see the list of the 12 sound categories (corresponding to the 12 sound
buttons on the right of the control panel). You can select a category field by tapping on it.
Alternatively, you can select the categories using the 12 sound buttons of the
SOUND SELECT
group on the control panel.
•
With the two arrow keys below the list you can scroll in the category list.
12 sound
categories
current
Part
up to 6 groups
per category
List of the
single sounds
scroll
categories
scroll sounds
to the top of
the sound list
to the end of
the sound list