3
The following buttons are available at the top of all pages in the application.
Table 1. Appliance Dashboard Fields
Device Type
Identifies the model of this device.
Serial Number
Identifies the serial number for the device.
MAC Address
Identifies the Media Access Control (MAC) address,
which is a unique identifier assigned to network inter
-
faces for communications on the physical network seg
-
ment.
Firmware Version
Identifies the firmware version installed on the station.
Standalone Operation
Enables or disables Standalone mode.
Volume Cut Level (dB)
Specifies a temporary volume setting for the speaker
during the current intercom call or page.
Note:
This is a temporary adjustment that allows the user
to experiment with the loudness of the speaker and will
be reset to the normal setting on subsequent calls. To
make permanent adjustments, change the station-spe
-
cific cut level settings on the Nyquist System Controller.
The value can be adjusted between -42 and 0 dB.
Table 2. Appliance Dashboard Buttons
Dashboard
Displays the dashboard.
Configuration Settings
Accesses the Configuration Settings page where you can
view various options or select to receive configuration
settings from the server.
Network Settings
Accesses the Network Settings page where you can view
and set network settings, such as the static IP address.
Firmware Update
Accesses the Firmware Update page where you can view
the current Nyquist version, update firmware to a new
version, the configuration to factory defaults, and
reboot the appliance.
Logs
Accesses log files, which record either events or mes
-
sages that occur when software runs and are used when
troubleshooting the appliance.
DSP
Accesses the DSP page where you can view and set
parameters for Digital Signal Processing (DSP).
