Bogen Nyquist NQ-S1810CT-G2, Configuration Manual

Page: 14 / 23

12
The following parameters appear for each Multicast Address configured for this device.
Web Confirm Password Re-enter the password used to log into the appliance.
Time Zone Specifies the time zone in which the device resides.
Output Power (Watts) Specifies the output power for the amplifier in Watts.
Valid values are: 1/8, 1/4, 1/2, 1, 2, and 4.
Enable SIP Calls Enables this device to receive one-way SIP calls, wherein
only the caller can be heard (such as announcements). If
enabled, a number of SIP-related configuration settings
are displayed.
SIP Server Address
a
Specifies the IP address of the SIP Registration Server with
which the device will register.
SIP Codecs
a
Displays a read-only list of codecs allowed on SIP sessions.
SIP Extension
a
Specifies the SIP extension for this device.
The extension, along with the IP address, is used to specify
the URI used to place a SIP call to this extension:
sip:<extension>@<local_ip_address>
SIP Network Port
a
Specifies the IP port on which to communicate with the
SIP Registration Server (typically 5060).
SIP User Name
a
Specifies the SIP user name used to register with the SIP
server.
SIP Password
a
Specifies the SIP registration password used to register
with the SIP server.
Intercom Cut Level
a
Specifies the output level of the speaker.
This can be a value from -42 and 0 dB.
The default value is -20 dB.
Note: To modify, click on the value, adjust the slider on the
popup using the cursor keys or mouse, and click the check
box button.
a. Available only when Enable SIP Calls has a value of Yes.
Table 6. Configuration Settings (Standalone enabled)