Before installation
Packaging Removal & Unit Placement
Before installation, check the extraction unit for damage.
All packaging must be removed before the unit is connected
to the power supply.
Please read all instructions in this manual before using
this extractor.
1.
Move the unit to the location where it is going to be
installed and remove the outer packaging.
This
unit should be installed in a well-ventilated area.
Ensure that 500 mm space is available around any
vented panels on the extractor to ensure adequate
airflow.
2.
Check the filter is located in its correct position
before replacing the lid and securing the clips
Caution
Due to the weight of the extractor suitable lifting
equipment should be used and with regard to appropriate
safety precautions. (See Appendix for product weight
details)
Caution
Do not block or cover the cooling vents on the unit,
as this severely restricts airflow and may cause damage to
the unit.
Caution
Under no circumstances should the exhaust
outlet/s be covered as this will restrict the airflow and cause
overheating.
01
Summary of Contents for V600
Page 1: ...V600 Issue 2 Jan 2017 ...
Page 2: ......
