2
3
WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
Component list:
QTY
Description
1
Latch
1
Striker
1
Handle
6
5
⁄
55 16
⁄⁄
" Lag Screws
5
⁄
55
16
⁄⁄
" Lag Screws
Latch
Striker
Handle
1
2
3
4
5
Determine Latch Specifi cations for Clearance:
a. The Contemporary Post Latch with Handle requires
a latch clearance of 1"-3" and works with a post
size of 4"+ and upright size of 3"+ (Fig. 1).
Determine Latch Location:
NOTE: Latch should be on the same side as the hinges.
a. With gate closed, align latch on post at desired
height, center striker on upright and determine gate
handle location on upright (Fig. 2).
b. Mark screw location on post and upright (Fig. 3).
Mount Latch on Post:
a. Drill 7/32" pilot holes on the post for latch location
(Fig. 4).
b. Install latch to post with provided screws and
tighten (Fig. 5).
Mount Striker on Gate:
a. Drill 7/32" pilot holes on the gate for striker
location (Fig. 6).
b. Install striker to gate with provided screws
and tighten (Fig. 7).
Mount Handle on Gate:
a. Drill 7/32" pilot holes on the gate for striker
location (Fig. 8).
b. Fasten handle to gate with provided screws
and tighten (Fig. 9).
Fig. 2
Fig. 3
Fig. 5
Fig. 4
Fig. 7
Fig. 6
Fig. 9
Fig. 8
Fig. 1
4"+
Post
3"+
Upright
Upright
1" to 3"
1" to 3"
Latch
Latch
Clearance
Clearance
