N2400340 Rev. 2
Page 7
5.0
Installation
5.1
Place the unit on a flat and stable surface.
5.2
Fit the power line cord, supplied with the unit, into the
power socket on the rear of the unit and plug the power
cord into a properly grounded outlet.
6.0
Operation
The Boekel UV Crosslinker is equipped with a UV-protective viewing
window. This window protects users from harmful UV rays that are
generated inside of the unit. Do not operate the unit with the door
open or attempt to defeat the safeguards on the unit.
Upon Pressing the Power Key, the Startup Screen is displayed.
After the Startup Screen is displayed for 1 second, the Main Screen is
displayed. The colon for energy blinks, showing that Energy Mode is
selected. The Up and Down keys are used with a speedup algorithm
to set the desired target energy value.
If the “Mode” key is pressed, the colon for time blinks, showing that
Time Mode is selected. Pressing the “Mode” button toggles between
Energy and Time Modes. The Up and Down keys are used with a
speedup algorithm to set the desired countdown time value. The
default time setting is 2:00 minutes. The default energy setting is
120,000uJ.
If Energy Mode is selected and the “Start/Stop” Key is pressed, the
controller sounds a brief beep and the display shows the following for 1
second:
The following screen is then displayed.
ENERGY blinks briefly every two seconds to remind the user that they
are in Energy Mode. A small UV icon appears in the upper right corner
of the display to show the user that the UV bulbs are energized. While
STARTING CYCLE
ENERGY MODE
TIME: 02:00
UV
ENERGY: 120000 uJ
