Bodyworx L7900LP, Owner'S Manual

Page: 7 / 16

STEP 03
1.
PLACE 50*100MM SQUARE CAP (98) ONTO TOP CROSS BEAM (10).
2. ATTACH TOP CROSS BEAM (10) ONTO THE VERTICLE BEAM (09) WITH
M10*70MM BOLT (57), M10 WASHER (72) AND M10 NYLON NUT (68) AND
CONNECT THE GUIDE RODS (02) TO THE TOP CROSS BEAM (10) AS
SHOWN.
3. ATTACH RUBBER BUMPER (37) TO THE VERTICLE BEAM (09).
4. ATTACH PULLEY BLOCK (20) TO THE VERTICLE BEAM (09), USE M8*60MM
BOLT (62) WITH M8 WASHER (73) AND M8 NUTS (69).
5. PLACE 38MM SQUARE CAP (42) ONTO VERTICLE BEAM (09).
-6-