Bodyworx L7900LP, Owner'S Manual

Page: 10 / 16

STEP 07
1.
PLACE RUBBER CAP (40) ONTO BOTH ENDS OF LEFT BASE (79).
2. ATTACH RIGHT BASE (04) AND RIGHT BACK BASE (93) ONTO LEFT BASE
(79) AND MAIN BASE (01) USE WITH M10*70MM BOLT (57), M10 WASHER
(72) AND M10 NYLON NUT (68) AS SHOWN.
3. ATTACH LEFT UPRIGHT FRAME (80) ONTO RIGHT BACK BASE (93) AND
TOP CROSS BEAM (10) AS SHOWN.
4. ATTACH SEAT FRAME SUPPORT (82) TO LEFT BASE (79).
5. ATTACH BACK SEAT TUBE (104) ONTO LEFT BASE (79). USE WITH
M10*70MM BOLT (57), M10 WASHER (72) AND M10 NYLON NUT (68).
6. ATTACH REAR SEAT FRAME (81) ONTO THE SEAT FRAME SUPPORT (82)
THEN, ATTACH THE OTHER END TO BACK SEAT TUBE (104), AS SHOWN.
7. SECURE RUBBER STOPPER (37) ON THE REAR SEAT FRAME (81).
8. ATTACH HAND GRIP (35) TO REAR SEAT FRAME (81) AS SHOWN.
-9-