Bodyworx L7900LP, Owner'S Manual

Page: 9 / 16

STEP 05
1. PLACE 50MM SQUARE CAP (41) INTO BOTH ENDS OF PRESS BAR (14).
1. INSTALL OIL BUSHING (52) INTO THE PRESS BAR (14).
2. PLACE BUFFER (75) TO PRESS BAR (14) AS SHOWN.
STEP 06
1. ATTACH PRESS BAR (14) TO TOP CROSS BEAM (10) WITH PRESS BAR
SHAFT (53) AND OIL BUSHING (52) M16 WASHER (70) M16 NYLON NUT
(66) AS SHOWN.
2. ATTACH PEC DEC PAD (28) AND HAND GRIP (35) SLIDE ONTO PEC DEC
ARM (15&16).
3. ATTACH HANDLE PIPE (33) AND HAND GRIP (35) TO PEC DEC ARM
(15&16) WITH M10 BOLT (60), M10 WASHER (72) AS SHOWN.
4. INSTALL PEC DEC ARM (15&16) TO PRESS BAR (14) WITH M16 WASHER
(70) SPRING WASHER (102) AND M16 NYLON NUT (66) AS SHOWN.
5. PLACE PRESS PIN (17) INTO PRESS BAR (14) USE FASTENING (94) WITH
M6*30MM BOLT (96) M6 NYLON NUT (97) AND SPRING (95) AS SHOWN.
-8-