Bodyworx L7900LP, Owner'S Manual

Page: 6 / 16

STEP 02
1.
ATTACH THE RUBBER DOUNT (08) ONTO THE GUIDE ROD (02).
2. SLIDE THE WEIGHT PLATE (07) AND TOP PLATE (06) OVER GUIDE ROD
(02).
GROOVED SIDE OF WEIGHT PLATES SHOULD FACE DOWN
3. INSTALL 25MM ROUND BUSHING (45) INTO THE SELECTOR SHAFT (05).
WITH PIN (46) THEN ATTACH THE SELECTOR SHAFT (05) INTO THE TOP
PLATE (06) AS SHOWN.
4. PLACE 50MM SQUARE CAP (41) ONTO FRONT BASE (01).
-5-