Bodyworx KR6611 Owner'S Manual Download Page 7 | Manualshive

Page: 7 / 24

background image

6

ASSEMBLY INSTRUCTIONS

STEP 4: Attach the SUPPORT BRACKET(60) onto the RAIL(52) with HEX BOLTS(M8x16mm)(97). Press the

NUT CAPS(79) onto NYLOCK NUT(M10)(105) and HEX BOLTM10x75mm (100).

STEP 5: Attach the RAIL(52) onto the MAIN FRAME(1) by sliding the RAIL PIVOT(49) into the bracket on the

MAIN FRAME(1) and securing with HEX BOLT (M10125mm)(103) and NYLOCK NUT(M10)(105).

Press the NUT CAPS(79) onto HEX BOLT(M10x125mm)(103) and NYLOCK NUT(M10)(105).

STEP 6: Connect the lower end of the SUPPORT TUBE(56) to the MAIN FRAME(1) with HEX BOLT

(M10x85mm)(101) and NYLOCK NUT(M10)(105). Press the NUT CAPS(79) onto HEX

BOLT(M10x85mm)(101) and NYLOCK NUT(M10)(105).

STEP 7: Attach the REAR SUPPORT(62) into the REAR SUPPORT BRACKET(61) located on the RAIL(52)

with HEX BOLT(M10x95mm)(102) and NYLOCK NUT(M10)(105). Lock the REAR SUPPORT(62) in

position with the PULL PIN(63). Press the NUT CAPS(79) onto HEX BOLT(M10x95mm)(102) and

NULOCK NUT(M10)(105).

«
...
5
6
7
8
9
...
»

Summary of Contents for KR6611

























Reviews:

No comments

Related manuals for KR6611

NEO Bike Smart T8000

Brand: Tacx Pages: 27

Brand: BH FITNESS Pages: 33

Brand: Sunny Health & Fitness Pages: 7

Brand: MBH Fitness Pages: 26

Brand: Kettler Pages: 28

Brand: York Fitness Pages: 18

Brand: Hammer Pages: 22

Brand: Hammer Pages: 28

Brand: Spirit Pages: 22

OSP209M Kinetic Hybrid Spin Bike

Brand: Orbit Pages: 20

Brand: Trojan Pages: 20

Brand: Matrix Pages: 29

Brand: Matrix Pages: 39

ES MATRIX INDOOR CYCLE

Brand: Matrix Pages: 44

Brand: Matrix Pages: 64

Brand: Impex Pages: 4

Brand: Impex Pages: 12

Brand: Impex Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands