Bodyworx JX735, Manual

Page: 15 / 25

15
**If the machine has HRC function, P8 Custom will be replaced by HRC
function. The operation ways are as follows:
P8 HRC HRC
function：(
This function must be attached with heart beat to finish
)
The program aims to exercise heartbeat. When operating, the heartbeat value is equal to the
pre-set value, the angle and speed will keep steady to maintain the heartbeat value in certain
range to achieve the exercising effect.
After you have selected this mode, the program will require you input the values according to
following ways:
1.
AGE LCD flashes and press or to adjust the age. After finish setting, press
to enter next option. Age preset value
：
30
. Range：
13~80
，
Step
is
1
.
2.
At this time LCD of PULSE light flashes, the mode will request you to put in heartbeat
value. The value will change according to the age and please refer to the attached table in
the rear of this indication. Then select the suitable value in the table. You can press or
to adjust heartbeat value. If you don’t make any change, press and mode will start
according to pre-set value and turn to next position.
3.
TIME window starts flashing, mode will request you to put in time value. You can press
or to set sport time you need. Or press directly to start exercise with no
countback.
（* Range of time：
20~99 min
，pre-set value is
0 min
，
step is 1
.）
**
The chart below will show the relationship between different age and heart rate of this
product of HRC function
：