Bodyworx JX735, Manual

Page: 11 / 25

11
7.
MAINTENANCE
1. Walking Belt Centering. If the Walking Belt tracks off
center to the right or left of the deck, first turn the
power off. Then use 6mm Allen wrench to tighten the
rear roller bolt on the side of the treadmill toward which
the belt is moving. For example, if the belt moves to
the left and the deck becomes exposed on the right,
tighten the bolt on the left side of the frame. Tighten
about 1/4 of turn (clockwise). If the belt does not
move back to the center of the treadmill, make another
adjustment to the same bolt. Once the Walking Belt
has been adjusted closer to the center, the treadmill can
be started again.
Ps.1: The above mentioned is pretty import, make sure to
follow the procedure.
Ps.2: Make sure the walking belt going on right without
any tracks off the centers it depends on the position
and weight.
2. It is recommended that the deck be lubricated every 6-12
months according to the frequency of usage. First, use
6mm Allen wrench to loosen the bolts in the end caps.
Pull up the Walking Belt, dispense the lubricant on the
deck, and spread evenly. After lubricating the deck,
center the belt, and check the belt tension. Adjust the
belt as mentioned in step 3. (Ps. If the belt happens to
slip, follow the above steps and lubricate the running
deck.)
SUGGESTED PREVENTIVE MAINTENANCE
SCHEDULE IN ACCORDANCE WITH THE
AVERAGE RUNNING SPEED
Measurement Speed Interval
6KM/hr below 1 year
6~12KM/hr 6 months
Metric
12KM/hr above 3 months
4mile/hr below 1 year
4~8mile/hr 6 months English
8mile/hr above 3 months
Note: This preventive maintenance schedule is
only meant for home use. It is suggested to
maintain the unit every month for commercial
use.