Bodyworx JX735, Manual

Page: 14 / 25

14
(1) When TIME has bee set, the window will display a time value counting down from the
target value, when the time reaches 0:00, the treadmill will stop automatically.
(2) When TIME hasn’t been set, the window will display the exercise time, when the time
reaches 99:00, the treadmill will stop automatically.
5.
When you press Mode key, it will switch among SPEED, DISTANCE and CALORIES
while INCLINE, PULSE or WEIGHT not, only displaying INCLINE. If there is PULSE, it
will mainly display Pulse. If there is pulse value, the pulse window will display pulse
value.
6.
Press Stop when the motor is working, the motor will stop and the incline motor will stop,
the window will display Stop; If you press START key again, the motor will start after
3-seconds countdown , the speed will be keep at the same before stop , and the incline will
be increased to the set height before stop.
7.
During Stop, press Stop and hold it for 3 seconds, it will switch to start/ready status.
8.
Under
End status, if it last 30 seconds
（or press
Stop key
）,
it will switch to start/ready
status.
9.
The time pre-set value is 0, range 20~99,when the time is edited at 20 minutes , you can
press +- key to increase or decrease, the increase step is 1, if decrease , it will go back to 0
directly. During exercise, the matrix window goes contrarotate like along playground.
V. Program Mode
P1 Manu time
：
pre-set 0min
；range
20~99min
，
step 1 min.
P2 9 hole LEVEL
：
pre-set
1，range
1~10
，
step1
，
3500 meter is based on distance.
P3 hill climb LEVEL
：
pre-set
1，range
1~10
，
step 1.
time
：
pre-set 30min
；range
20~99min
，
step 1 min.
P4 hill run LEVEL
：
pre-set 1
，range
1~10
，
step 1.
time
：
pre-set 30min
，range
20~99min
，
step 1 min.
P5 interval LEVEL
：
pre-set 1
，range
1~10
，
step 1.
time
：
pre-set 30min
，range
20~99min
，
step 1 min.
P6 rolling LEVEL
：
pre-set 1
，range
1~10
，
step1.
time
：
pre-set 30min
，range
20~99min
，
step 1 min.
P7 Weight loss LEVEL
：
pre-set 1
，range
1~10
，
step 1.
time
：
pre-set 30min
，range
20~99min
，
step 1 min.
P8 Custom time
：
pre-set 30min
，range
20~99min
，
step 1 min.
PROGRAM has 30 levels in all
(
SE01~SE30) and the pre-set values all are lowest values.
Setting
：
time
，
program execute value and setting time can execute in 30 level averagely.
（
1
）
After enter program control function, the light that delegates LEVEL will be light and the
window will blink. This function is to choose the exercise intensity level ( L1~L10). You
can
or to
change it to your required level and press ENTER to confirm.
（
2
）
After the level is confirmed
，
the
TIME window will blink. Press
or
to set
up the sport time. Or you can choose to press START directly to start move with
count down.
**Time range
：
20~99 min
，
the preset value is 30min
，
step is 1 min.