Bodyworx JX325, Operating Instructions Manual

Page: 8 / 21

7
5.
ASSEMBLY STEPS
Two persons are required to finish the
assembly steps.
(Caution!! Please follow exactly the
assembly steps below to avoid injury. )
1. After pull out Control Wire with Guide
Thread in right Upright (D), cap it into the
wire clip and fix it inside hole of right
Upright. After insert left and right Uprights
(C, D) to the proper place, tighten with
Allen Bolt (a) according to right drawing.
Ps.1. To avoid unexpected accident, always
assemble the treadmill with an assistant, do
not assemble by oneself.
Ps.2. When assemble the Upright, one person
should hold the Upright to prevent it from
falling.
C
D
a
a
2. To assemble the Computer
：
Connect control wires between left and
right Handrails and the Computer. Then
insert left and right Handrails (C, D) into
the Computer (A), tighten with Allen Bolt
(g) according to right drawing.
A
C
D
g
g