Bodyworx JX325, Operating Instructions Manual

Page: 13 / 21

12
B. MODE operation instruction (Under this mode total have MANUAL and 6 PROGRAM
installed program):
1. MANUAL
：
Under this mode, you can set up the time, distance as your need, operation method
are as below
：
1.1. Press , when see the light of MANUAL LED light is linking, press , then into
the MANUAL mode.
1.2. At this moment you can press , to set up time, after finished, you can press
directly to operate, or press to distance.
Program pre-set values is 20 min
Time range
：
5~99 min
，
Step is 1 min
1.3. At this time you can press , to set up distance, after finished, you can
press directly to operate, or press back to MODE option.
Program pre-set value is 5 km
Distance range
：
1~9.9 km ,Step is 0.1 km
2. PROGRAM
：
Under this mode, including P1~P6 total 6 modes, you can choose your favorite
mode, operation as following
：
2.1 Press , when see MANAUL LED light is blinking, you can press , to
choose P1~P6 any one of mode, then press then can into the mode you choose,
2.2 After into the mode, you can see the LEVEL window begins to blink, under
PROGRAM mode, P1~P6 each mode have 3 LEVEL, you can choose your favorite
mode.
2.3 At this time you can press , to choose LEVEL, after finished, press then
the treadmill will begin to operate, or press into PROGRAM time setting.
2.4 After into the time setting, you can press , to set up time, after finished, can
press directly to operate, or press and back to MODE option.