Bodyworx JI1625, Owner'S Manual

Page: 12 / 22

1)
General Operation:
➢
Turn on the treadmill.
➢
Put the safety key in the recess of the console.
The beeper will sound. At this time, all windows will display the values. The preset values are
0, not blinking which means the treadmill has entered start / ready status. Under this status,
the user can hold the grip pulse sensor to detect heart rate values directly.

If the safety key / clip is not placed in the recess of the console, the TIME window will
display “----”, which means the treadmill can not work normally.

During exercise, if the safety key / clip is off, then the beeper will sound for warning, then
the treadmill will stop operation. At this moment, put the safety key back to the recess of
the console, then all the values will reset to its initial values.

Under the START / READY state, if you do not hold the grip pulse sensor, the PULSE
window will display HP, especially when you hold both sides of the grip pulse sensor; you will
subsequently see the PULSE window display the heart rate values.

It will show the relationship whether the amount of running is adequate under the different
age and heart rate groups:
12