background image

1.3 At this time, you can press           or            to set the distance. After finishing, press

              to start running, or press               to go back to the options in the Mode pattern.

Pre-set value : 5 km

Range of distance : 1 ~ 9.9 km, Step is 0.1 km.

PROGRAM : This mode includes 6 patterns, P1 ~ P6, user can choose the pattern you like 

freely. The operation is shown below:

2.1

Press               , when the MANUAL LED light is blinking, press           or           to 

choose any pattern from P1 to P6. After it has finished, press                 to enter the 

pattern you have chosen.

2.2 You will see the LEVEL window twinkling after you enter the pattern. Every pattern from 

P1 to P6 has 3 LEVELS under the PROGRAM, so choose one accordingly to user 

demand.

2.3 At this time you can press             or           to choose LEVEL. After finishing, press

and the treadmill will start, or press                to enter the time setting of the PROGRAM. 

2.4 After entering the time setting, press           or           to set it. When finished, press

to start running, or press                to enter the MODE and choose the pattern again. 

Pre-set value : 32 minutes

Range of time : 5 ~ 99 minutes, Step is 1 minute.

2.5 Refer from Table 1 to Table 6 below the instruction for the Pre-set programs of P1 ~ P6.

3)

Body Fat Mode

Under START / READY position, press               , the Body Fat LED light is blinking, which 

shows that the Body Fat Function is on duty. When choosing this function, the program will 

require the user to enter the following values.

Age : Pre-set value is 30, range : 13 ~ 30. Step is 1, choose the correct value by 

,             keys, after choose the correct value then press                 into the next value 

setting.

14

Summary of Contents for JI1625























Reviews: