Bodyworx J4715, Owner'S Manual

Page: 6 / 32


BEFORE BEGINNING
Clean your area:
1. Remove the treadmill from the box and place on a flat surface. It is recommended that you place a protective covering underneath the treadmill.
2. Place in an area that will meet minimum clearance requirements.
Front & Side: 1ft /30cm
Back: 6ft /180cm
3. Whenever moving or setting up the treadmill, the deck must be in the upright position with the deck safety lock securely engaged.
4. To place the TREADMILL in the operating position, release the deck safety lock then lower the deck with the end caps until it rests completely on the
ground.
5. Make sure safety cord is engaged otherwise unit will not operate.
6. Plug unit into outlet following the grounding guidelines below.
Grounding:
This unit must be properly grounded to ensure safe operation. Should this equipment fail to perform properly, grounding reduces the chance of electrical
shock. The unit must be plugged into a suitable AC grounded outlet that is correctly installed and grounded in conformance with local codes and
ordinances.
Gather your tool:
Make sure all the necessary tools gathered before the installation. Having the right tools at hand will save time and make less assembly mistakes.
Helpful Tips
- Straddle the running belt and allow it to start moving at a safe speed before stepping on.
- Hold the handlebar while adjusting the controls.
- Focus your eyesight ahead to help maintain your balance.
- Wear comfortable, good-quality walking or running shoes.
- Warm-up and cool–down before and after your workout period.
- 3 -