10
STEP 3
Remove clamp (25) and allen screw (22) from the front post (4). Attach handlebar (5) to
front post (4) and tighten with clamp (25), allen screw (22), cover for clamp (37) and
T-type knob (21).
Thread hand pulse wires (20) into the grommet (32) and pull out from the top bracket.
Connect hand pulse wires (20) and middle sensor wire (33) to computer (6)
accordingly.
Attach computer (6) to the bracket of front post (4), tighten with two screws (27) which
are pre-assembled on the back of computer (6).
5
20
6
32
27
22
25
21 37
33
1
4
STEP 4
Attach the seat (8) to seat post (7), tighten with a washer (12) and a club knob (42).
Insert seat post (7) into main frame (1) through cover for seat post (36). Line up the
holes and secure seat in position with quick release knob (11). The correct height for
seat can be adjusted after the bike is fully assembled.
11
7
8
12
36
42
1
