12
COMPUTER INSTRUCTION
FUNCTION BUTTONS
MODE
1. Press the button to select TIME, DISTANCE and CAL to preset.
2. Press the button for selection function display value on LCD, or enter after setting.
3. Press the button and hold for 2 seconds to reset all value except Odometer to be zero.
(When the user replace batteries, all the values will reset to ZERO automatically.)
SET
To set up the target value of TIME, DISTANCE and CAL
Press the button and hold for 2 seconds to speed up the increment.
RESET
Press the button to reset function value when setting.
Press the button and hold for 2 seconds to reset all value except Odometer to be zero.
(When the user replace batteries, all the values will reset to ZERO automatically.)
FUNCTIONS & OPERATIONS
1. Batteries
Installation
Please install 2 pieces of AA 1.5V batteries in the battery case on the back of monitor.
(Whenever Batteries are removed, all the functions values will be reset to zero.)
2. Auto
On/Off
While the user starts to do exercise, the Display will show out the workout value automatically. Once
stop exercising over 256 sec, the Display will turn off. But the workout value of odometer will be hold.
While user starts exercise again, workout value of odometer will accumulate continuously.
3. Auto
Scan
After the monitor is power on or press Mode key, the LCD will display all functions values from
Time-Calories-Odometer- Pulse- Speed- Distance. Each value will be held for 6 seconds.
4. Speed
Display the current training speed from 0.0 to 99.9 KPH or MPH.
5. Distance
