BODYTONE Home DS60, Instructions Manual

Page: 3 / 19

EXERCISE MONITOR INSTRUCTIONS
ENGLISH FOR DS60
II. DISPLAY FUNCTION
III. OPERATION
TIME
Display range 0:00 ~ 99:99
；
Setting range 5:00 ~ 99:00 minutes
DISTANCE
Display range 0 ~ 99.99
；
Setting range 1.00 ~ 99.90KM
CALORIES
Display range 0 ~ 9999
；
Setting range 100 ~ 9900 Calorie
PULSE
Display range P-30 ~ 230
；
Setting range 0-50 ~ 220
WATT
Display range 0 ~ 999 watt
；
Setting range 10 ~ 350watt
SPEED
0.0~99.9 KM/H
RPM
0~999
I. BUTTON FUNCTION
START/STOP
Start or stop workout
RESET
In Stop mode, press this button to go back to main menu;
Hold on this button for 2 seconds, the console will reboot.
UP (+)
1.Select workout mode
；
2. Increase function setting value.
MODE
In Stop mode, press this button to confirm setting and enter the program.
In Running mode, it is invalid to press this button.
DOWN (-)
1.Select workout mode
；
2. Decrease function setting value.
RECOVERY
Test Heart rate recovery status.
1. Install batteries (or press RESET KEY 2 seconds), the BUZZER beep one
sound , and LCD full display 2seconds (Figure 1). Then display wheel diameter,
KM or ML, and Fat symbol “E” for 1 second (Figure 2). The console will go to
Standby mode (Figure 3). At this point, the motor reverses to Load 1.
2. In the Standby mode (Figure3), press MODE/ENTER button to select mode:
MANUAL
>
P01
>
P02
>
P03
>
P04
>
P05
>
P06
>
P07
>
P08
>
P09
>
P10
>
P11
>
P12
>
P13
>
P14
>
P15
>
P16
>
P17 (recyclable).
3. If user choose“MANUAL” mode, press “MODE”button directly and go to
“TIME” setting. Rotate knob UP
（
+
）
/DOWN
（
-
）
to adjust value, then press
“MODE go to next setting: set “Distance/ Calorie”(Figure 5). After setting,
press “START/STOP”button
，
console start to exercise and calculate. Rotate
knob UP
（
+
）
/ DOWN
（
-
）
to adjust LOAD level.
Figure 1 Figure 2