2017/12/5V1.4+V1.2
15
◼
STEP5 Assemble the main frame and the console set
Assemble console set (B) on the accessory tray set (E) and connect the control wires on
accessory tray (E) to console wires. When connecting the wires, will need one person to hold
the consoles set and be careful not to drop down on the console set. Use screw (K10) and
washer (K11 & K12) to bolt the console set on the accessory tray set (E). Use screw (K13) to
bolt the console back cover (C) on the console. Then, use screw (K14) to bolt the accessory
tray back cover (D) on the accessory tray, please be careful not to clip the wires when bolt the
covers. After complete the assembly, see the figure in below and use screw (K20) bolt the
accessory try lower cover (N) on the accessory tray set.
Notice:
1. When connecting the control wires, it will show the
“Click” sound after well connect.
2. To avoid any dangerous, ALWAYS have two or more people to make the assembly together.
X01 Collecting board upper connecting wire
X02 Upper control wire
X03 Console upper power wire
X04 Upper optical sensor wire
X05 Membrane key-Heart rate board connecting
wire
X06 Middle control wire
X07 Console middle power wire
X08 Middle optical sensor wire
X09 Middle TV cable (for touch console only)
X10 Middle internet cable (for touch console only)
