14
A. Instructions for use
1. ZZABP01 needs special precautions regarding ElectroMagnetic Currents and to
be installed and put into service according to the EMC information provided in
the section "Accompanying Documents";
2. Portable and mobile RF communications equipment can affect ZZABP01.
B. Technical description
1. Warning that the use of accessories, transducers, and cables other than those
specified with the exception of transducers and cables sold by the manufacturer
of the ZZABP01 as replacement parts for internal components may
result in increased emissions or decreased immunity of the ZZABP01.
2. Warning that the ZZABP01 should not be used adjacent to or
stacked with other equipment.
Guidance and Manufacturer’s Declaration – Electromagnetic Emissions
The ZZABP01 is intended for use in the electromagnetic environment specified below. The
customer or the user of the ZZABP01 should assure that it is used in such an environment.
Emissions
Compliance
Electromagnetic Environment–Guidance
RF emissions
CISPR 11
Group 1
The ZZABP01 uses RF energy only for its
internal function. Therefore, its RF emissions
are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The ZZABP01 is suitable for use in all
establishments, including domestic
establishments and those directly connected
to the public low voltage power supply network
that supplies buildings used for domestic
purposes.
Harmonic
emissions
IEC 61000-3-2
Class A
Voltage
fluctuations/
flicker
emissions
IEC 61000-3-3
Complies
Accompanying Documents
