8
• Battery life varies with the ambient temperature and may be shortened at lower
temperatures.
• The batteries may leak and cause a malfunction.
• Use the specified batteries only. The batteries provided with the device are for testing
monitor performance and may have a shorter lifespan.
• Used batteries may leak and damage the main unit. Pleases observe the following points:
* lf you are not going to use the unit for a long period of time (approximately three months
or more), remove the batteries.
* Replace worn batteries with all new batteries whose polarities are in the correct
direction.
1. Press and hold “SET” key until the year number displays and
flashes on the LCD to enter setting mode.
2. Press “MEM” key to adjust the year, then press “SET” key again
to save your setting and enter the month setting mode.
3. Press “MEM” key to adjust the month. Following the same steps
to adjust date/hour/minute/(Voice on/off) until setting
completed(“ ” is the On, “ ” is the Off). Non-talking model does not have this
function, or you may choose method No.2 to set the voice.
The device displays readings in both mmHg and
kPa, two distinct blood pressure display units.
If you want to switch from one unit displayed
to another, hold the ON/OFF button for 10
seconds. You will switch from mmHg to kPa or
kPa to mmHg. You can also change memory unit
values using the same method.
Time and Voice On/Off Setup
Unit Conversion Display
(mmhg/kpa)
