17
Wrench (S13/14/15) × 1pc
NO. 84 Screw (M5×10) × 2pcs
NO. 92 Screw (M5×10) × 2pcs
86
84
89
80
96
92
41
39
96
41
41
41
96
80
3
ASSEMBLY INSTRUCTION
Step 6:
Assembly of the Monitor and the Bottle Holder
1. Connect the cables of the mid handlebar weld (80
& 96) to the cables of the monitor (41).
ATTENTION
Make sure not to pinch the cables during the
following step.
2. Mount the monitor (41) to the mid handlebar
weld (39) with two screws (84).
3. Mount the bottle holder (89) to the mid handlebar weld (39) with two screws (92).
4. Now tighten all screw joints with the necessary tools.
→
The assembly of the equipment is completed.
Step 7:
Alignment of the Feet
If the floor is uneven, you can stabilize the equipment by turning the setting screws under the main
frame.
1. Lift the equipment on the desired side and rotate the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove them and to raise the equipment.
3. Rotate the screws counterclockwise in order to lower the equipment.
