ELLIPTICALS USER’S MANUAL
36
5.9. SPEED SENSOR TEST
The SPEED SENSOR test allows you to see whether your speed sensor circuit is functional or not.
1. In the DIAGNOSTICS Menu, select SPEED SENSOR TEST and press the
JustGo
TM
to accept.
2. A message will be displayed on the scrolling screen indicating whether the sensor is good or bad.
• Check if your speed sensor is connected.
• Check to make sure the sensor is not dirty.
3. Operate the pedals. Once the computer has finished counting, it will display the following message: THE SENSOR IS OK.
4. Press
STOP
to terminate the test.
5.10. STATISTICS
The STATISTICS allow you to view various parameters related to the use of your elliptical, such as time and distance.
1. In the DIAGNOSTICS Menu, select STATISTICS and accept it by pressing
JustGo
TM
.
The TOTAL DISTANCE
displayed indicates the total distance traveled with the elliptical during all exercise programs
(XX.XX miles).
The TOTAL TIME
displayed indicates the amount of time the machine has been used during all exercise programs (XX
Months – XX Day - XX Hours - XX Min).
2. Press
STOP
to terminate the test.