STEP 1
Attach the Rear Stabilizer (15) to the Rear Frame (14)
with two M8 X 70mm Carriage Bolts (59), two
M8 x 20mm Curved Washers (52), and two M8 Nylon
Nuts (58).
If necessary, place a piece of tape over each
M8 X 70mm Carriage Bolt (59) to hold it in place as
you perform this step.
STEP 2
Orient the Seat Post (12) as shown. Loosen the Seat
Adjustment Knob (18) and slide the Seat Post onto
the Rear Frame (14). Align the the Seat Post with one
of the holes in the Rear Frame and tighten the Seat
Adjustment Knob into the hole.
ASSEMBLY INSTRUCTIONS
PLEASE DO NOT RETURN TO STORE; CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT
1-877-872-6970
BDEX2496.0
8
14
15
59
59
52
52
58
18
12
14
STEP 3
Pull the Rear Extension Wire (46) from the inside of
the Rear Frame (14). Pull the Front Extension Wire
(49) from the inside of the Frame (13). Connect the
Rear Extension Wire to the Front Extension Wire.
Slide the Rear Frame (14) onto the Frame (13). Attach
the Rear Frame to the Frame with four M8 x 12mm
Screws (51) and four M8 x 20mm Washers (54).
13
54 51
46
49
54
54
51
51
14
