BEFORE YOU BEGIN
BDEX2496.0
PLEASE DO NOT RETURN TO STORE; CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT
1-877-872-6970
2
•
A flat area of 5’ x 4’ will be required to assemble and properly use the BF Recumbent Bike.
•
For your benefit, read this manual carefully before using the BF Recumbent Bike. Please review the explod-
ed diagram and familiarize yourself with the parts that are labeled.
•
Before beginning assembly, make sure to read the information on this page. This brief introduction will help
you with assembly and save you time.
•
Assembly Requires Two Persons. For your convenience and safety, assemble the BF Recumbent Bike
with the help of another person.
•
Set Aside Enough Time. The BF Recumbent Bike has many features, so the assembly process will take
approximately 30 to 60 minutes. Assembly will go smoothly if you set aside plenty of time and decide to
make the task enjoyable.
•
Select A Location. Because of its weight and size, the BF Recumbent Bike should be assembled in the
location where it will be used. Make sure that there is enough room to walk around the BF Recumbent Bike
as you assemble it.
•
How to Unpack the Box. Place all parts of the BF Recumbent Bike in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
Note: The assembly
hardware for the BF Recumbent Bike can be found in the carton.
•
Tools Required For Assembly. Assembly will require a hex key, a Phillips screwdriver, and an adjustable
wrench.
•
How to Identify Parts. Remove all the parts from the carton and carefully place them on the floor. To help
you identify the small parts used in assembly, we have included a PARTS LIST in this manual. Place the list
on the floor and use it to easily identify parts during each assembly step.
Note: Some small parts may have
been preattached. If a part is not in the parts bag, check to see if it has been preattached.
•
Tightening Parts. Tighten all parts as you assemble them, unless instructed to do otherwise.
• The decal shown to the right has been placed
on the recumbent bike. If the decal is missing
or illegible, call the toll-free telephone number
on the back cover of this manual and order a
free replacement decal. Apply the decal in the
location shown.
