1
4
5
3
7
2
46
15
46
85
85
10
40
88
40
40
54
88
69
47
84
84
41
85
85
43
89
67
68
63
6
6
47
13
14
65
65
40
98
106
100
101
106
106
101
107
106
107
107
101
109
101
101
101
106
106
S
TEP 1 ASSEMBLE MAIN FRAME
5
To ease the assembly process, do not tighten bolts until instructed.
1. Attach Rear Stabilizer(2) to Base Frame(1) using two 3/8"X3" Bolts(88), four 3/8" Washers(101) and two
Nuts(107). Attach Front Stabilizer(10) and Low Row Connector(13) to Base Frame(1) using two 1/2"X3"
Bolts(85), and two Nuts(106). Cap Rear Stabilizer and Front Stabilizer with four 50mm SQ. Cap(40).
2. Attach two Foot Plate Stoppers(65) onto Low Row Connector(13). Attach the Foot Plate(14) to Low
Row Connector(13) by aligning the holes and inserting Foot Plate Roller(15).Insert two 1" Round Plug
(46) into the Foot Plate Roller(15).
3. Attach Rear Upright(3) to Rear Stabilizer(2) using two 1/2" Washer(100) and Nuts(106).
4. Attach Front Upright(4) to Base Frame(2) using two 3/8"X3" Bolts(88), four Washers(101) and two Nuts
(107).
5. Attach Top Frame(5) to Front Upright(4) using two 1/2"X4" Bolts(84) and two Nuts(106). Attach Top
Frame(5) to Rear Upright(3) using two 1/2"X3" Bolts(85) and two Nuts(106).
6. Insert four Plastic Guide Rod Holders(47) into Base Frame and Top Guide Rod Retainer(7) as shown.
Slide a Rubber Donut(63) onto one end of each Guide Rod(6) and then insert the Guide Rods into
the Plastic Guide Rod Holders in Base Frame as shown.
7. Slide each 10 Lb. Plate(68) over guide rods. Make certain that each plate is oriented with selector
hole on bottom and facing forward. Attach Top Plate(67) to Selector Rod(69) using Top Plate Bolt(109).
Slide Top Plate and Selector Rod(69) onto Guide Rods(6).
8. Slide Top Guide Rod Retainer(7) over top of Guide Rods(6) and attach Top Guide Rod Retainer(7) to
Top Frame(5), using two 3/8"X2-3/4" Bolts, four 3/8" Washers and two Nuts(107). Attach 50mm Plug
onto Rear Upright(3) and 30mmX60mm Plug onto rear of Top Frame
