25
24
27
55
55
56
56
56
56
28
28
31
22
56
56
58
58
58
66
80
78
79
29
26
26
104
82
111
86
106
30
30
70
70
88
86
106
88
65
63
75
30
95
109
108
74
81
108
109
95
70
70
111
106
69
69
106
111
84
84
70
70
70
70
94
30
4
23
32
54
65
1.Attach two 45 x 75 End Plugs (56) to Bench Stabilizer (22). Attach Bench Stabilizer (22) to
Bench Upright (23), using two 1/2” X 2-3/4” Hex Bolts (86), four 1/2” Washers (106) and two 1/2”
Nylon Nuts (111).
2.Attach three 45 x 75 End Plugs (56) to Bench Main Frame (24). Attach Bench Main Frame (24)
to threaded bolt on Base Frame (1), using two 3/4” Bushings (69), one 1/2” Washer and one 1/2”
Nylon Nut (111). Tighten Nut and then back off just enough that Bench Main Frame (24) pivots
freely. Slide Seat Slider (25) onto Bench Main Frame (24). Attach Bench Main Frame (24) to
Bench Upright (23), using two 1/2" x 2-5/8" Hex Bolts and two 1/2" Washers (106).
3.Insert Leg Extension Adjuster (31) to Bench Upright (23). Lock into place with Pop Pin (80).
Attach Leg Extension (32) to Leg Extension Adjuster (31), using two 1/2” Bushings (70), one Axle
(81), two 5/16" Washers (108), two 5/16" Spring Washers (109), and two 5/16" x 5/8" Hex Head
Bolts (95). Slide Rubber Doughnut (63) and Spring Clip (75) onto weight holder of Leg Extension
. Cap Leg Extension (32) with three 50 mm End Plugs, one Round End Plug (65) and one
Stopper (66). Note: L pin (74) is used to lock Leg Extension (32) into place when performing
decline exercises. Remove it when performing leg extension and leg curl.
STEP 3 Bench Assembly
-7-
