1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
TO EASE THE ASSEMBLY PROCESS.
DO NOT TIGHTEN BOLTS UNTIL INSTRUCTED.
NOTE: Before installing plastic
parts, please allow them to
acclimate to room temperature or
they may be damaged.
CAREFULLY install all plastic
components using a Rubber Mallet.
1. Install two Oval End Caps (26) onto both ends of
each of the Base Frames (2) as shown.
2. Install two Round Caps (28) into the top and bottom
ends of the Rear Upright (6) as shown.
3. Attach two Base Frames (2) to the Main Frame (1)
using four 1/2" X 3-3/4" Hex Bolts (39) and four 1/2"
Washers (54) as shown. Do NOT Tighten.
4. Attach Front Upright (5) with the numbers facing
forward to the Main Frame (1) using two 3/8" X 1"
Hex Threaded Bolts (44) and two 3/8" Spring
Washers (55). TIGHTEN the two 3/8" X 1" Hex
Threaded Bolts (44).
5. Attach Rear Upright (6) to the Main Frame (1) using
two 3/8" X 2-5/8" Hex Bolts (42), three 3/8" Curved
Washers (57) and one 3/8"
Nylon Nut (59).
6. Insert two Plastic Guide Rod Holders (18)
completely into the Main Frame (1) as shown.
Insert both Guide Rods (7) into the Plastic Guide
Rod Holders (18).
STEP 1 Assemble Main Frame
5
26
26
44
55
7
6
5
7
28
18
55
57
18
1
39
54
2
2
39
54
26
28
57
42
57
42
26
39
54
39
54
55
