User Guide e-CELSIUS Performance.2
EN
29
Picture 28: CSV information
At the end of the file, you can find the list of automatic and manual markers.
Secondary functions
7.2.1
Backup mode
When the operation of the monitor is disturbed (failure, broken
, …), it is possible to recover the
communication with capsule which was associated first; via an another monitor. This allow to
ensure the continuity of the cycle of measurement
It is necessary to start the replace operation with an operational monitor. This mode will allow
to retrieve data from all the e-Celsius
®
performance capsules communicating on the selected
channel, in the communication range of the monitor and whose ID number is known.
Important:
the capsules to recover have to be all issues from the same monitor and recovered
with another one. The monitor broken has to not be switch on in the same environment after
backup beginning under penalty of data corruption or capsules extinction
First, it is necessary to bring a new functional and charged monitor. Then, check that no
capsule is associated with this monitor. Connect it to the e-Performance Manager software
and configure the operating channel of the monitor to the same channel as the failed monitor.
In fact, on the operating channel of the capsules you want to recover [follow the procedure in
§ 6.7.2]. After you have started the e-Performance Manager software, connect the monitor to
a functional PC/Mac with the cables provided by the manufacturer. Select "Backup mode" on
the e-Performance Manager software.
