10
S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of
STEP 2C. Some components may be pre-assembled. Nylon lock nuts will not fully screw
onto bolts, they must be wrench tighten to fully go on.
2A.
Attach Uprights
(B)
, Side Base Frames
(A)
and Steel Plates
(D)
together using:
8 - (#1) M16x110mm Hex Head Bolt
16 - (#3) M16 Flat Washer
8 - (#4) M16 Nylon Lock Nut
2C.
Attach J Cups
(E & F)
to Uprights
(B)
.
NOTE:
1) Please refer to the drawing for the correct bolt hole locations. The bolt
holes are the 12th and 15th holes from the front of the Base Frame.
2) SECURELY anchor the machine to the floor using the anchor holes
provided.Please consult a professional contractor for the actual anchoring
of the machine.