8
S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. DO NOT wrench tighten until instructed.
Some components may be pre-assembled. Nylon lock nuts will not fully screw onto
bolts, they must be wrench tighten to fully go on.
1A.
Attach Side Base Frames
(A)
to Rear Base Frame
(C)
using:
4 - (#1) M16x110mm Hex Head Bolt
8 - (#3) M16 Flat Washer
4 - (#4) M16 Nylon Lock Nut