background image

PAB-21X

PREPARATION

 

Required tools

 

The basic tools that you must obtain before assembling 
the PAB-21X include but are not limit to:

 

• Standard Wrench Set

 

• Metric Wrench Set

 

• Adjustable Wrench 

 

• Standard / Metric Allen Key Set

 

Installation Requirements

 

Follow these installation requirements when assembling 
the PAB-21X:

 

Set up the PAB-21X on a solid, " at surface. A smooth, " at 
surface under the machine helps keep it level.

 

Provide ample space around the machine. Open space 
around the machine allows for easier access.

 

For aesthetic purposes, insert all bolts in the same 
direction unless speci! ed (in text or illustrations) to do 
otherwise.

 

Leave room for adjustments. Tighten fasteners such as 
bolts, nuts, and screws so the unit is stable, but leave 
room for adjustments. Do not fully tighten fasteners until 
instructed in the assembly steps to do so.

 

Fill out and mail the warranty card.

 

Ordering Replacement Parts

If you need to order replacement parts please be

 

prepared to provide the following information

 

when contacting us so that we can assist you better.

 

1. Model Number

 

2. Place of Purchase

 

3. Serial Number (S/N)

 

4. Part # and Description 

 

Assembly Tips

Read all “Notes” on each page before beginning each step.

While you may be able to assemble the PAB-21X using the 
illustrations only, important safety notes and other tips may be 
included in the text.

Some pieces may have extra holes that you will not use. Use 
only those holes indicated in the instructions and illustrations.

NOTE: With 

so many assembled parts, proper

 

alignment and adjustment is critical. While

 

tightening the nuts and bolts, be sure to leave

 

room for adjustments.

NOTE: The 

bottles that are marked “Poison” is your

 

touch up paint. Keep away from children.

: Obtain assistance$ If you feel like you can’t

 

      assemble the PAB-21X by yourself then do 

 

      not attempt to do so as this could result in

 

      injury. Review the Installation Requirements

 

      before proceeding with the following steps.

5

YOUR S/N # CAN
BE FOUND HERE

Summary of Contents for POWERLINE PAB-21 X



















Reviews: