Step 4
Attach Computer Holder (3) to the handle bar, using screw (4).
Slide the computer (1) onto the computer holder (3).
Then contact the lines by corresponding.
Step 5:
Remove the nut (17) which on the right pedal (16) firstly.
Then attach the right pedal (16) to the main frame (12) tuning by clockwise.
Lock the removed nut (17) back use 17-19 wrench. Completely tighten by wrench.
Remove the nut (19) which on the left pedal firstly.
Then attach the left pedal (20) to the main frame (12) tuning by anti-clockwise.
Lock the removed nut (19) back use 17-19 wrench. Completely tighten by wrench.
IMPORTANT NOTES:
Note that the Right pedal should be threaded on clockwise and the Left pedal
anti-clockwise!