Page 9
Hardware Required
Assembly Step 5
#13. Bolt (M8x65 mm)
[4 pieces]
#30. Bolt (M8x20 mm)
[2 pieces]
Washer
#14. Washer (M8)
[2 pieces]
Secure the
Back Pad (#11)
to the
Back Pad Support Frame
(#07)
using two
Bolts (#30)
and two
Washers (#14)
. DO NOT
OVER TIGHTEN THE
BOLTS (#30)
AS THIS MAY STRIP THE
THREAD OR CRACK THE WOOD IN THE
BACK PAD (#11).
Secure the
Arm Pad (#12)
to the
VKR
Arm Rest Support Frame
-Left (#34)
using two
Bolts (#13)
and two
Curved Washers (#20)
DO NOT OVER TIGHTEN THE
BOLTS (#13)
AS THIS MAY
STRIP THE THREAD OR CRACK THE WOOD IN THE
ARM
PAD (#12)
.
Repeat this process on the other side.
#20. Curved Washer (M8)
[4 pieces]
BOLT
Assembly Instructions
PT600/628/810
The assembly process is now complete.
However
,
for your own
safety, please make sure to read this entire Owner’s Manual which
includes safety instructions and warnings, as well as any safety
/warning labels affixed to the product before use.
For your safety, please visually and functionally inspect and
the unit after assembly is complete.
