BOLT
#13. Bolt (M8x65 mm)
[4 pieces]
Washer
#14. Washer (M8)
[8 pieces]
Nut
#15. Lock Nut (M8)
[4 pieces]
Hardware Required
Assembly Step 1
Align and attach the
Base Frame (Right) (#02)
to the
Base
Cross Frame (#03)
as illustrated in the diagram. Insert two
Bolts (#13)
through two
Washers (#14)
followed by the
Base
Frame (Right) (#02)
and
Base Cross Frame (#03)
. Secure
them together using two
Washers (#14)
and two
Lock Nuts
(#
15
)
. Repeat this process on the other side.
Page 5
Assembly Instructions
PT600/628/810
NOTE:
Hand tighten the Bolts and Nuts in this step;
Do NOT
use wrench at this time to avoid misalignment.
