background image

General Information

    Page 1 

Warranty

Body Flex Sports warrants your product for 

a period of 1 year for the frame and 90 days 

on all parts if the item is used for the intended 

purpose, properly maintained and not used 

commercially.  Any alterations or incorrect 

assembly of the product will void this warranty.  

Proof of purchase must be presented for any 

warranty validation (no exceptions).  This 

warranty applies to the original purchaser only 

and is not transferable.

This warranty does not cover abuse or defects 

caused during use, storage or assembly.

During the warranty period, Body Flex Sports 

reserves the right to:

a). provide replacement parts to the 

purchaser in an effort to repair the item.

b). repair the product returned to our 

warehouse (at the purchaser’s cost).

c). replace the product if neither of the two 

previously mentioned actions effect repair. 

This warranty does not cover normal wear and 

tear on upholstery.

Questions

If you have any questions concerning the 

assembly of your item or if any parts are 

missing, please DO NOT RETURN THE 

ITEM TO THE STORE OR CONTACT THE 

RETAILER.  Our dedicated customer service 

staff can help you with any questions you may 

have regarding the assembly of this unit and 

can also mail you replacement parts.

Customer Support

Customer Support is open 9:00 a.m. to 5:00 

p.m. (Pacific Time) Monday through Friday.  

Please contact us by any of the following 

means.

Body Flex Sports, Inc.

21717 Ferrero Parkway, Walnut, CA 91789

Telephone: (888) 266 - 6789

Fax: (909) 598 - 6707

Email: info@bodyflexsports.com

Safety

Before you undertake any exercise program, 

please be sure to consult with your doctor.

Frequent strenuous exercise should be 

approved by your doctor and proper use 

of your product is essential. Excessive or incorrect 

training may result to health injuries. Please read 

this manual carefully before commencing the 

assembly of your product or starting to exercise.

• Please keep all children away from this item 

when in use. Do not allow children to climb or 

play on them when they are not in use.

• Supervise teenagers while they use this unit.

• For your own safety, always ensure that there 

is at least 3 feet of free space in all directions 

around your product while you are exercising.

• Regularly check to see that all nuts, bolts and 

fittings are securely tightened. Periodically 

check all moving parts for obvious signs of 

wear or damage.

• Clean only with a damp cloth, do not use 

solvent cleaners. If you are in any doubt, do 

not use your product; contact CUSTOMER 

SUPPORT.

• Before use, always ensure that your product 

is positioned on a solid, flat surface. If 

necessary, use a rubber mat underneath to 

reduce the possibility of slipping.

• Always wear appropriate clothing and 

footwear such as training shoes when 

exercising. Do not wear loose clothing that 

could become caught in moving parts during 

exercise.

• Do not use this unit if it is not functioning 

properly or if it is not fully assembled.

• Do not use this unit for commercial purposes.

  This unit is for home use only.

Storage and Use

Your product is intended for use in clean 

dry conditions. You should avoid storage in 

excessively cold or damp places as this may 

lead to corrosion and other related problems.

Weight Limit

Your product is suitable for users weighing:

250 pounds or less.

• Before use, you must read and understand all

  instructions & warnings stated in this Owner’s 

  Manual as well as posted on the equipment.

• It is the facility owner’s responsibility to properly 

  instruct users on the proper operation of the 

  equipment and to warn them of the potential 

  hazards. 

• If at any time during exercise you feel faint, dizzy 

  or experience pain, stop and consult your 

  physician.

Assembling Tools

- Ruler with both metric and English measurements

- 2 x Adjustable Wrenches

- 1 x Philips (”Crosshead”) Screw Driver

• Any adjustment devices that could interfere with 

  the user's movement on this unit should not be 

  left projecting.

PT600/628/810

Summary of Contents for PT600













Reviews: