Page 10
PEDAL ASSEMBLY
Attach the
Left Pedal (#44)
onto the
Left Pedal Tube
(#03L)
as shown in the drawing below using three
Hex Bolts (#22)
and securing from the bottom with three
Washers (#35)
, and three
Nylon Nuts (#38).
Repeat this process on the other side using
Right Pedal (#45)
and
Right Pedal Tube (#04R).
HANDLE BAR ASSEMBLY
.
On the left side, insert
Left Handle Bar (#07L)
over the
opening at the tip of
Left Coupler Bar (#04L)
. Align the
holes of the
Left Handle Bar (#07L)
and
Left Coupler
Bar (#04L)
and secure by using two
Bolts (#17)
and
two
Carriage Bolts (#14)
as illustrated.
Repeat this process on the other side using
Right
Handle Bar (#07R)
and
Right Coupler Bar (#04R)
. .
A s s e m b l y S t e p 5
Hardware Required
COUPLER BAR ASSEMBLY (PART III)
Using the drawings as reference, attach the free end of
the bottom of the
Left Coupler Bar (#04L)
to the front .
of the
Left Pedal Tube (#03L)
by aligning the holes.
After the holes are aligned, insert one
Hex Bolt (#21)
through the
Left Pedal Tube (#03L)
followed by the
Left
Coupler Bar (#04L)
and secure using one
Washer (#33)
and
one
Nylon Nut (#39).
***NOW, you may return to PART II of this Assembly
Step to tighten the hardware on both sides.***
Place one
Bolt Cap (#28)
on top of
Hex Bolt (#21)
and
Nylon Nut (#39)
and secure in place.
NUTS
BOLTS
#14. Carriage Bolt (M6x16 mm)
[4 Pieces]
#17. Bolt (M6x15 mm)
[4 Pieces]
#21. Hex Bolt (M10x55 mm)
[2 Pieces]
#22. Hex Bolt (M8x40 mm)
[6 Pieces]
#38. Nylon Nut (M8)
[8 Pieces]
#39. Nylon Nut (M10)
[2 Pieces]
WASHERS
#33. Washer (M10)
[2 Pieces]
#35. Washer
(M8, φ16 mm)
[6 Pieces]
Assembly Instructions
BR1895/2895