18
3. When the recovery is complete, the screen will display: Excellent (F1.0), Very Good
(F2.0), Good (F3.0), Satisfactory (F4.0), Sufficient (F5.0) or Fail (F6.0) based on the
rate of recovery.
4.
P0 = the user’s heart rate when the recovery mode was initiated.
P1 = the user’s heart rate after completing the recovery mode.
Using Optional Heart Rate Monitors
1. Chest Strap
1.1. In order to ensure the chest strap is working correctly please refers to the
manufacturer’s instructions. In general, the chest strap must remain wet to
accurately work. Moistening the electrodes is very important. Be sure to fasten
the strap correctly below your pectoral muscle.
General Maintenance
1. Cleaning -
Use soap and warm water or antibacterial wipes to clean your unit.
2. Tightening -
Periodically inspect your unit to insure that all screws, nuts, and bolts are
tightened and retighten if necessary. Do not over tighten.
Summary of Contents for GB7008
Page 1: ...DUAL ACTION RECUMBENT STEPPER ...
Page 20: ...19 EXPLODED DRAWING ...
