Assembly Instructions
A s s e m b l y S t e p 4
Remove the
Lock
Bolt
(#4)
which were pre-assembled on
the
Main Frame (#27)
and set them aside as they will be
used in a later process.
With the help of an assistant, attach the
Aluminum Track
(#21)
to the
Aluminum Track Joint (#15)
and secure them
together using two
Washers (#8)
, two
Spring Washers
(#36)
and two
Bolts (#20)
. Once the
Aluminum Track (#21)
is secured to the
Main Frame (#27)
, connect the
Sensor
Cable (#25)
from the
Aluminum Track (#21)
to the
Wire
(#5)
on the
Main Frame (#27)
. Screw the
Lock
Bolt
(#4)
in
to the
Main Frame (#27)
and turn in the direction indicated
on the illustration to lock the
Lock
Bolt
(#4)
in to the
Main
Frame (#27)
.
*NOTE: When securing the
Lock Bolt (#4)
, slightly lift the
Aluminum Track (#21)
while turning the
Lock Bolt (#4)
Handle. This would allow the
Lock Bolt (#4)
to easily go
into place.
Hardware and Tool Required
BRW7200/7900 BODY ROWER
Page 8
#20. Bolt (M8×20 mm)
[2 Pieces]
#8. Washer (M8)
[2 Pieces]
#33 Spanner S6
Bolt
Washer
Tool
#36. Spring Washer (M8)
[2 Pieces]
