Computer Operation
BRW7200/7900 BODY ROWER
Page 16
4.Pulse Measurement
Wear the chest strap and measure your heart rate, the computer will show your current heart beat rate in beats per minute (BPM) on the LCD after 3~4 seconds.
During the measurement, heart icon will flash with simulative ECG showing.
Remark: During the process of pulse measurement, because of the contact jamming, the measurement value may not be stable when start, then it will return to
normal level. The measurement value cannot be regarded as the basis of medical treatment.
Specifications
SPM: Showing the current rowing frequency per minute. Range : 0~999.
STROKES: Showing the current rowing count . Range:0~999.
TIME: The accumulative exercise time, range : 0:00~99
:
59
.
Preset time range is 5:
00~99:
00. The computer will start to count down from preset time to 0:00 with average time for each resistance level. When it reaches to
zero, the program will stop and computer alarm. If you do not preset the time, it will run with one minute decrement each resistance level.
DIST: The rowing accumulative distance. Range : 0.00~9.99~99.9
MILE
the preset distance range :0.50~9.50~99.5 When the distance reaches 0, the program will stop and the computer will alarm.
CALORIE: The exercise accumulative calories burnt. Range : 0.0~99.9~999
the preset calories range :10.0~90.0~990. When the calorie reaches 0, the program will stop and the computer will alarm.
PULSE: Showing the exercise heart rate value. Range: 60~220BPM(beat per minute)
RESISTANCE LEVEL: Showing resistance level. Range:1~16 with 8 segments display.
NOTE: 1. TIME and DIST can be set at the same time. But once set TIME and DIST, the user can not set CALORIE.
2. The user cannot set TIME and CALORIE, or DIST and CALORIE at the same time. That is to say, if set time, but not set distance, the proceed to set
calorie, the time will reset to zero. If set distance, but not set time, then proceed to set calorie, the distance will reset to zero.
3. If preset the TIME or DIST or CALORIE, the computer will display "STOP"and alarm when any of preset value reach zero. But keep rowing, the "STOP"
will switch to "START" and the window of zero will count up.
4. After preset TIME and DIST, the computer will calculate and display the target average speed automalically. Even the preset time or distance reach zero,
the computer will keep displaying target average speed and only when change the rowing program or reset, the target speed can be cleared.
BREAKDOWN DISPLAY
1.When the computer displays ERROR1, please check if the motor is good and if the motor wires
connect well.
ADAPTOR
INPUT: AC (The voltage depends on different country)
OUTPUT: 8VDC 500mA
