BRM3671/3690/3171
Page 9
Assembly STEP 3
Please refer to the diagram below and pay special attention to
corresponding LEFT & RIGTH side parts. Misplacing parts during
assembly will lead to incorrect assembly and may result in
serious injury.
Slide the
Couple Bar Axle (#15)
through the center slot on the
Center Post (#02)
and center it so it is evenly distributed on the
left/right sides. Next, slide one
Special Washer (#24)
on each
side then, followed by corresponding
Left/Right Coupler Bar
(#05/#06).
Secure each side with a
D Shape Washer (#25)
, a
Round Cap
(#26)
, a
Washer (#44)
, and a
Bolt (#33)
.
Hardware Required
(#33)
Bolt (M8x20 mm)
[2 Pieces]
(#25) D Shape
Washer
(19mm)
[2 Pieces]
(#26) Round Cap
[2 Pieces]
(#24)
Special Washer
(19mm)
[2 Pieces]
(#44)
Washer (M8)
[2 pieces]
