BRM3671/3690/3171
Page 12
Assembly STEP 6
Remove the
Screws (#37)
that are pre-assembled on back of the
Monitor (#17)
and set them aside as they will be used shortly in
this step.
Connect the
Wire (Upper) (#61)
to the
Monitor (#17)
and connect
the
Pulse Sensor Wire (#60)
to the
Monitor (#17)
. Secure the
Monitor (#17)
to the bracket of the
Center Post (#02)
using four
Screws (#37)
that were previously removed.
Hardware Required
(#37)
Screw (M5x12mm)
[6 Pieces]
