BRM3671/3690/3171
Page 10
Assembly STEP 4
Align and attach the
Pedal Connection Joint (#14)
on the
Right
Pedal Tube (#04)
to the right
Crank (#16)
. Insert a
Bolt (#19)
through a
Special Washer (#20)
followed by
Pedal Connection
Joint (#14)
and
Crank (#16).
Screw the
Bolt (#19)
tightly into the
Crank (#16)
by turning
CLOCKWISE
and then secure it with the
Nylon Nut (#18)
by turning it
COUNTERCLOCKWISE
.
Align and attach the
Right Coupler Bar (#06)
to the
Right Pedal
Tube (#04)
. Secure them together using a
Bolt (#29)
, a
Washer
(#42)
and a
Nylon Nut (#39)
. Attach the
Right Pedal (#48)
to the
Right Pedal Tube (#04)
and secure them together using three
Hex Bolts (#32)
,three
Washers (#44)
and three
Nylon Nuts
(#41)
.
Repeat this process on the other side with the
Left Pedal Tube
(#03)
and
Left Coupler Bar (#05)
.
Hardware Required
(#19) Bolt (1/2"x97mm)
[2 Pieces]
(#18)
Nylon Nut (1/2")
[2 Pieces]
(#20)
Special Washer
(16mm)
[2 Pieces]
(#42)
Washer (M10)
[2 Pieces]
(#44)
Washer (M8)
[6 pieces]
(#39)
Nylon Nut (M10)
[2 Pieces]
(#41)
Nylon Nut (M8)
[6 Pieces]
(#32)
Hex Bolt (M8x40mm)
[6 Pieces]
(#29) Bolt (M10x58mm)
[2 Pieces]
